Matrix Cable
10Gtek has developed a "matrix cable" to realize coordinated calculation of multiple groups of computing units and to distribute computing power faster in supercomputing. The matrix cable can realize any interconnection of 8 groups of QSFP28 (32 x 25G ports).
Immersion Cooling System
10Gtek QSFP28 Extender is designed to be applied for immersion solution. It extends the 100G interfaces to surface, aiming to realize the interconnection of 100G transceivers and AOC cables.
QSFP+ Extender
10Gtek's QSFP+Extender is used for long-distance transmission of QSFP+. The QSFP+Port could be transferred/converted into 4x SFP+port by Direct Attach Copper (DAC) technology under very lower insert lose. 10Gtek's QSFP+Extender are provided in 1U rack and movable version with 3.3V power supply. Transmission distance could be extended longer by connecting with Stable SFP+Transceivers.
QSFP28 Extender
100G Solution for Liquid Immersion Cooling System Liquid cooling has been an accepted method of conditioning electronics for more than half a century. Immersion Cooling is at the foundation of Immersed Computing. It means the complete immersion of electronic components in a dielectric liquid. By doing so, all the heat generated by the IT is captured in the liquid. Suitable dielecric liquids can absorb approximately 1500 times more heat energy than air with the same volumes and temperatures.
Transceivers
SFP+ transceiver is a standardized form factor for fiber optic and is used in datacom and telecom optical links, offering a smaller footprint and lower power consumption than XFP transceivers. Initial standard applications focused on 8G & 10G Fiber Channel, 10G Ethernet, SONET OC-192, SDH STM-64.
DAC(Direct Attach Cable)
DACs are widely chosen by data centers for connecting servers to the Top Of the Rack(TOR) switch as they are passive, consume zero power, have the lowest latency and cost-effective. DAC is the ideal option for data centers, super computers and other circumstances similar. 10Gtek offers a wide range of products for 0.5m to 10m lengths and in QSFP+, SFP+, XFP, CX4 form factors.
100G QSFP28 DAC
10Gtek’s QSFP28 passive copper cable assemblies feature eight differential copper pairs, providing four data transmission channels at speeds up to 28 Gbps per lane, and meet 100G Ethernet and Infiniband Enhanced Data Rate (EDR) requirements. Offered in a broad range of wire gages (from 30AWG through 26AWG), this 100G copper cable assembly features low insertion loss and low cross talk. QSFP28 form factors can be used with current 40G and 100G applications with substantial signal integrity margin.
100G QSFP28 AOC
10Gtek’s active optical cable assemblies use state-of-the-art technology to provide cost effective high data throughput interconnects. The cables incorporate E/O and O/E conversion built into the connector shell to yield a dramatic improvement in PCB real estate utilization. Using 850 nm VCSEL technology, the active cable assemblies will operate over a data rate of 25 Gb/s per lane with an aggregate data rate of 100 Gb/s in each direction.
AOC(Active Optical Cable)
10Gtek's SFP+ Active Optical Cables are hot-swappable, low-voltage cable assemblies that connect directly into SFP+ modules at both ends. These cables use a 20-position connector with active circuitry to increase distances and to improve EMI and reduce signal loss. 10Gtek's SFP+ Active Optical cable transmits 10Gbps data in each direction over a loose tube fiber with distance up to 100m.
自动化生产线（DAC电缆）
10Gtek的自动化生产线确保了在激光切割、铝屏蔽层剥离、隔离器剥离、自动整形、自动焊接和紫外线固化等工艺过程中的制造一致性。每条DAC电缆都经过时域反射计（TDR）和矢量网络分析仪（VNA）的测量，确保通过信号完整性测试。
10Gtek产品展示
从GBIC到SFP，10Gtek见证了光通信行业的蓬勃发展。
在过去十年间，10Gtek向全球用户提供了丰富多样的通信产品，助力全球信息化建设。
如今，10Gtek持续创新，稳步前行。展望未来十年，我们已做好充分准备，迎接新的挑战与机遇。
*200G~800G光模块、DAC、AOC等新产品现已推出，欢迎联系我们获取更多详情。
产品搜索
微信扫码咨询客服
